How to Clean a Washing Machine: Step-by-Step Guide

A washing machine can develop detergent residue, lint and musty smells when moisture and soil build up inside. Cleaning the drum, drawer and accessible seals regularly can help keep laundry fresh. The exact method depends on your washer model, so check its user manual before choosing a cleaning product or opening a service panel.
Quick answer
Empty the washer, run the manufacturer-approved tub-clean cycle with the recommended product, wipe the door and accessible seal, clean the detergent drawer as directed, and allow the interior to dry. Clean a drain filter only if your manual explains how to do it safely. Never mix cleaning chemicals.
Signs your washer needs cleaning
- Clothes or the drum smell musty.
- Detergent residue is visible in the dispenser.
- Lint or debris collects around the door seal.
- The machine displays a cleaning reminder.
- There is visible residue inside the drum.
Odours can also be caused by too much detergent, an overloaded drum, leaving wet laundry inside or a drainage problem. If cleaning does not help, seek qualified service.
What you need
- The washer’s user manual.
- A soft cloth or sponge.
- The cleaning product recommended for your model.
- A shallow container and towel if the manual describes user-cleaning of a drain filter.
Avoid abrasive pads and do not assume vinegar, baking soda, dish soap or bleach is suitable for every model. Use only the products and methods approved by the manufacturer.
Step 1: Empty the drum
Remove all clothes and objects. Check for lint and visible debris. A tub-clean cycle is generally intended to run without laundry unless your manual says otherwise.
Step 2: Run the approved cleaning cycle
If the washer has a Tub Clean, Drum Clean or Clean Washer programme, follow the manual. Add only the recommended product in the specified location. If there is no dedicated cycle, use the manufacturer’s approved alternative rather than guessing. Do not add detergent or other chemicals unless the instructions explicitly require them.
Step 3: Clean the detergent drawer
If the drawer is designed to be removable, release it as described in the manual. Rinse with lukewarm water and gently remove residue using a soft cloth. Dry the parts and reinstall them correctly. Do not force a drawer that will not release easily or put it in a dishwasher unless the manufacturer confirms that it is safe.
Step 4: Wipe the door and rubber seal
Use a soft damp cloth on the inner door or lid. For front-load washers, gently wipe the folds of the rubber gasket where moisture and lint may collect. Do not stretch or damage the seal. Use a cleaning product on it only when the manual confirms compatibility. If the seal is torn or continues to smell, arrange service.
Step 5: Check the drain filter carefully
Some models have a user-accessible drain filter; others do not. Follow the manual exactly. Turn off and unplug the washer if instructed, allow hot water to cool, and prepare towels and a shallow container because residual water may escape. Never remove a filter while the machine is running or force a stuck part. If instructions are unclear, contact the manufacturer or a qualified technician.
Step 6: Clean the exterior and let it dry
Wipe the outside with a soft cloth and a mild surface-safe cleaner. Keep moisture away from controls, plugs and outlets. After the cycle, follow any recommended rinse procedure, wipe accessible moisture and leave the door or lid open when the manufacturer recommends it, provided it is safe around children and pets.
How often should you clean a washing machine?
Use the schedule in your washer manual. Many manufacturers recommend periodic cleaning, often around once a month, but the interval depends on the model, frequency of use and household conditions. Clean the drawer and accessible seals when residue appears, and maintain filters only as directed.
How to prevent bad smells
- Measure detergent according to the label and load size.
- Use detergent suitable for your washer type.
- Avoid overloading the drum.
- Remove wet clothes promptly after a cycle.
- Clean the drawer and accessible seal regularly.
- Allow the interior to air out when the manual recommends it.
For more laundry advice, read our guides on how to use a washing machine, washing white clothes without yellowing and removing sweat stains from clothes.
Common mistakes to avoid
- Mixing different cleaning chemicals.
- Using more cleaner than the label recommends.
- Pouring dish soap into the drum and creating excess suds.
- Forcing the drawer or filter open.
- Opening a filter without preparing for residual water.
- Ignoring persistent odours, leaks or drainage problems.
Frequently asked questions
Can I use vinegar to clean my washer?
Do not assume vinegar is safe for every model. Follow the appliance manual and never mix vinegar with chlorine bleach or other cleaners.
Can I use baking soda?
Only if the manufacturer permits it. A recommended washer-cleaning product may be a better option for your model. Do not add multiple products together.
Why does my washer still smell after cleaning?
Residue may remain in a seal or drawer, or the issue may involve drainage or a component that needs service. If the smell persists after approved maintenance, contact a technician.
Should I leave the washer door open?
If the manufacturer recommends it, leaving the door or lid ajar can help the interior dry. Consider safety around children and pets.
Final checklist
- Check the manual before choosing a cleaner.
- Empty the drum and run the approved cycle.
- Clean the drawer and seal gently.
- Clean a filter only if user maintenance is described.
- Dry accessible surfaces and air out the washer as directed.
- Seek service if problems continue.
Good washer maintenance relies on approved cleaning products, careful detergent dosing and letting the interior dry between loads. If the appliance continues to smell, leak or drain poorly, professional inspection is safer than experimenting with stronger chemicals.
Further reading: Whirlpool: How to clean a washing machine and Beko: Washing machine cleaning and maintenance.
